The micro-loss blower heat series, similar to the zero-loss series, is also divided into two models according to whether the upstream front end is equipped with a chiller: the conventional series with chiller (EQG series) and the reinforced series without chiller (EQG-X series).
The micro-loss blower heat series, similar to the zero-loss series, is also divided into two models according to whether the upstream front end is equipped with a chiller: the conventional series with chiller (EQG series) and the reinforced series without chiller (EQG-X series). The front-end refrigerated dryer significantly reduces the water content in the intake air and lowers the load; without it, the water content is many times higher. The two series share the same design principle but differ greatly due to different loads; users should select the corresponding series according to actual conditions.
with a specific surface area of 350 m²/g, this high-efficiency adsorbent developed with upstream suppliers has an excellent adsorption rate to ensure a stable dew point.
vacuum negative-pressure filling ensures tightness and anti-pulverization for longer service life.
equipped with a PLC controller for real-time monitoring and data storage, integrating time, load and dew-point control for high energy efficiency.
supports easy remote control, centralized management, intelligent analysis and prediction to optimize operation.
corrosion-resistant, durable and aesthetically pleasing.
The existing dryer had unstable dew point, and moisture in the compressed air affected production quality. The lithium battery industry requires a high level of air dryness, which the existing equipment could not meet.
SolutionWe configured a micro loss blower heat desiccant air dryer with a stable dew point, meeting the production air demand. After commissioning, compressed air quality improved, and the air supply is stable and reliable.
中文
