联系我们
首页 博客

博客

产品选型、预防性维护、故障诊断和分行业压缩空气处理方案的自助技术资料库。

选型指南

分行业选型建议、恶劣环境适配说明，以及完整的系统配置模板，帮助您更有把握地确定压缩空气处理方案。

该分类下暂无文章。

保养与维护

每个行业对压缩空气的要求都不同。这些方案针对具体痛点，给出经过全球实际安装验证的 EPSEA 产品配置。

Industry Solutions

每个行业对压缩空气的要求都不同。这些方案针对具体痛点，给出经过全球实际安装验证的 EPSEA 产品配置。

电子
−70°C

Pressure Dew Point Achieved

Also delivered
  • ≤0.003

    mg/m³ oil content

  • Class 1

    ISO 8573-1 air quality

Compressed Air Purification for Electronics Manufacturing

Semiconductor fabs, PCB lines, and display makers need instrument air free of moisture, particles, and hydrocarbon vapor. Sub-nanometer contamination causes yield loss, copper corrosion, and early failure. Standard refrigerated dryers can't meet the dew point requirements.

  • HOC desiccant dryers — -40°C to -70°C PDP, 30–50% less energy, no external heater.
  • 1→0.01 µm — Two-stage coalescing prevents oil poisoning, extends desiccant life >7 years.
  • Activated carbon adsorber — <0.003 mg/m³ hydrocarbons, 3x below ISO 8573-1 Class 1.
  • 4–20 mA SCADA output — real-time verification, auto alarm if PDP deviates >2 °C.
  • YQH HOC Desiccant Dryer
  • 0.01 µm Coalescing Filter
  • Oil-Vapour Adsorber
Chemical & Petrochemical
60°C

Max Inlet Air Temperature Rated

Also delivered
  • ATEX

    Zone 2 certified

  • SS316

    Wetted parts standard

Instrument Air for Chemical Plants

Chemical and petrochemical facilities demand instrument air that is reliably dry, corrosion-resistant, and safe to operate in hazardous zones. Moisture in control valve actuators causes stiction, process upsets, and costly unplanned shutdowns.

  • Accept 60°C inlet — SS316 dryers accept 60°C inlet, no pre-cooling needed in hot climates.
  • Safe operation — Solenoids ensure safe, reliable operation in explosive atmospheres.
  • Protection Analyzer — Remove organic vapors & H₂S, protecting sensitive analyzers.
  • Automatic switching function — Duplex dryer with auto switchover ensures 100% availability.
  • YH High-Temp Dryer
  • YQD ATEX Desiccant
  • SS316 Filter Housing
食品与医药
0.01

µm Sterile Filtration Rating

Also delivered
  • FDA

    Food-contact grade

  • GMP

    Validated & documented

Hygienic Air for Food, Beverage & Pharma

Food production and pharmaceutical manufacturing require compressed air that is microbiologically safe, chemically inert, and fully traceable. Regulatory audits demand documented evidence of air quality.

  • ISO 8573-1 Class 1 oil — mandatory for direct food contact.
  • 316L electropolished housings — FKM seals, CIP/SIP-ready — hygienic for pharma.
  • Blow molding is crucial — 0.01 µm sterile filters at point-of-use eliminate bacteria.
  • Meets specifications — GMP documents include IQ, OQ, and PQ schemes.
  • YLL Refrigerated Dryer
  • SS316 Hygienic Housing
  • 0.01 µm Sterile Filter

    给我们留言